Animal & Poultry Feed Flat Die Pellet Mill Machine Pellet Press Pellet Mill Pelleting Machine

Product Description：

Animal feed pellet mill machine,the raw material for this machine can be the food grain like corn, wheat and the crushed waste from agriculture for example, corn straw, groundnut shell, grass, wheat bran, sawdust, and animal manure and so on, they can be pressed into both feedstuffs for many kinds of animals and biomass fuel, the diameter of the pellet can be 2~12 mm, when processing ,the lower temperature can maintain the nutrition of the products. And through general extrusion, it can kill micro~organisms, parasites to prevent disease and to store it easily.Firstly, put materials into the feeder and let them fall down onto a set of rotating rollers over the die; then, the materials will be compressed between the surface of die and the rotating rollers, while pellets coming out of the die they will be cut into set length by a sharp knife. The temperature is about 70°C in process, so the protein freezes, the nutritional value increases and is easy to absorbed for animals, pellets inside is ripening and outside slippy, rigid enough, suitable for long-term storage.

Advantages:
1.The machines for material of wide adaptability, can perfect compound feed processing a variety of different requirements;
2.The aircraft processing materials, the temperature is moderate, can very good to keep all kinds of trace elements in raw materials, good palatability, animal feed intake, conducive to digestion and absorption;
3.The machine processing of the material and the appearance is neat, smooth surface; density is big, easy to store and transport;
4.Finished product particle diameter can be changed between 2-6mm, length can be adjusted, adopted to the need of various kinds of breeding objects in different growth period.

FAQ:
1.The machine works well, but it can not make pellets, it is hard to form pellets. What can I do? 
Answer: If the moisture is too high or too low, it is hard to form pellets. It would be better if the moisture is between 13-25%, and the moisture depends on the raw materials. Different raw materials, different moisture.

2.The capacity becomes smaller after a period of time use, why?
Answer: Probably because the gap between die and rollers is too big. Please decrease the gap between die and rollers. Or it is because the moisture of raw materials is too low. Add some water to increase water content.

3.The machine stops suddenly during working?
Answer: There must be a big, hard foreign object or metal enter the machine, please cut off the power and get the object or metal out of machine.